Tips to open SP file
Can't open the SP file? You are not the only one. Thousands of users face similar problems every day. Below you will find tips on how to open SP files as well as a list of programs that support SP files.
SP file extension
| File Name |
SPICE Data Format |
| File Developer |
National Instruments Corporation |
| File Category |
Misc Files |
The SP file is supported on 1 operating systems. Depending on your operating system, you may need different software to handle the SP files. Below is a summary of the number of programs that support and open the SP file on each system platform.
What is SP file?
The file in the SP format belongs to the Misc Files category. The creator of this file is National Instruments Corporation. Misc Files consists of 6033 similar files. SPICE Data Format is supported by 1 operating systems. Although it can be found with greater or lesser success on any operating system, it will only be useful on Windows. The main program that supports this format is Spice. This was created by National Instruments Corporation.
How to open SP file?
The main problem with SPICE Data Format is that the SP file is incorrectly associated with programs. This causes the file SP to open by system applications not designed for this purpose, or to display a message that there is no associated program. This can be quickly resolved by following the instructions below.
The first thing you should do is just "doubleclick" on the SP file icon you want to open. If the operating system has an appropriate application to support it and there is also an association between the file and the program, the file should be opened.
Step 1. Install Spice
In this case, you should first verify that the Spice application is installed on the computer. This can be achieved by typing Spice into the operating system search engine. In the absence of an appropriate program, its installation in the vast majority of cases will fix the problem. Later in this article you will find a list of programs that can open SP files.
Programs to open SP file
Remember to download programs supporting SP files only from verified and safe sources. We suggest using the websites of software developers.
Step 2. Create association of Spice with SP files
If, despite the installed application, the SP file does not start in the Spice application, you must create a file association. This option is available from the level of Properties of a specific file available in the context menu. Information about the file and the program that the file is associated with are available here. Using the "Change" button we can select the desired program. The program should be visible in the window, otherwise it should be selected manually using the "Browse" button and the program installation directory should be indicated. However, it is important to check the "Always use the selected program ..." box, this will allow you to permanently associate the SP file with the Spice application.
Step 3. Update Spice to the latest version
The fault may also lie with the Spice program, it is possible that SPICE Data Format requires a newer version of the program. Some applications allow you to update from the program level, and for others you need to download the installer from the National Instruments Corporation page and install.
Step 4. Check for the following problems with the SP file
The problem may also be with the file itself if the above steps don't work. This could be due to the file itself, the cleanest issues are:
The affected file may be 0 KB or smaller than expected. This is most often caused by a problem while downloading the SP file. The file should be downloaded again, making sure that the process has finished correctly.
The most common cause here is computer viruses. Perform a virus scan using available and up-to-date anti-virus software. Some antivirus vendors also provide free online scanners. The scan should cover the entire computer, not only the SP file that we want to open. As a result of the scan, sometimes it is not possible to recover SP files, which are deleted if there is a backup of this file, then after restoring it, it must also be scanned.
This can happen especially when the program is dynamically developed and the structure of the SP files changes over time. These problems are known and are often very easy to fix using the software developers's website.
There can be many reasons for the failure. Depending on the type of file, it is necessary to repair it accordingly. Sometimes the program itself has options to repair the most popular SP file corruption. The easiest way to restore the file is from a backup or by contacting National Instruments Corporation, but this one can be expensive. Not all damage can be reversed.
When reading, a message appears that the file was encrypted or corrupted. The encrypted file SP except for the special designation, works normally, but only on the device where it was encrypted, before transferring it to another machine, decryption is required.
Some operating systems do not allow file operations in certain locations, eg in system directories or directly on the system drive. While there is usually no problem reading such a file, it may not be possible to save it. It is best to move SP to a different directory.
This problem usually affects more complex files. You may find that another program you are using is preventing you from working with the file. Closing other programs should help. If the error persists after closing other programs, wait for a while. Some anti-virus or backup software may occupy the SP file for a certain period of time. If the problem persists, restart the machine.
Was this page helpful? YesNo
